Fujitsu SCENICVIEW XP70 User Manual page 22

50
50
A26361-K954-Z100-1-5E19, edition 5
Application
You can adjust the display to the current application type:
● Normal operation (computer)
● Home theatre (video)
● Photographs (with Gamma correction)
ARLS (Automatic Room Light Sensing)
Automatically adapts the projector's brightness to the ambient
light level. You can select between automatic adjustment, darker
display, and brighter display.
Tune
You can set the phase length in the range from 0 to 100 and thus
fine-tune analogue computer output if the automatic adjustment
("Reset" or basic settings in the basic menu) is unsatisfactory.
Width
You can set the horizontal frequency to optimise the picture width
for analogue computer output if the automatic adjustment
("Reset" or basic settings in the basic menu) is unsatisfactory.
Position
You can adjust the picture position for analogue computer output
if the automatic adjustment ("Reset" or basic settings in the basic
menu) is unsatisfactory.
Tint
If you want to display video images in the NTSC format (American
TV), you can adjust the tint in the range from 0 to 100. This
setting has no effect on PAL or SECAM video images.
SCENICVIEW XP70
English - 19