Maintaining Units; General Safety Considerations - Fujitsu SCALEOVIEW S17-2 Operating Manual

General Safety Considerations

5 – Maintaining Units
This chapter provides information on the following aspects of pump/dispenser maintenance:
• Periodic Inspections
• Periodic Maintenance Requirements
• Special Maintenance Instructions
CAUTION
DEF is mildly corrosive. To avoid damage to components in the vicinity of the
dispenser, avoid use of materials that could be corroded, or use protective
coatings.
CAUTION
Do not open the electronics cabinet to change paper, to remove cash acceptor
cassettes, or to perform any other tasks when it is raining. The moisture from the
rain can damage the pump/dispenser.
General Safety Considerations
Safe operation of the equipment is very important to your customer and you. The following
recommendations are in addition to those found in the sections that follow and
Safety Information"
Do not allow the customer to use damaged units or broken components with sharp edges.
1
Do not allow the customer to use units with missing doors or panels or with doors open.
2
Ensure that the adequate and readable instructions are clearly given on the units or nearby
3
areas for potential safety hazards such as static electricity fueling hazards, use of unapproved
containers, and so on. Place signs where fueling customers will notice and can read them.
Do not use long hoses beyond recommendations that may present a trip hazard. Use hose
4
retrievers in good operating condition, when long hoses are used.
Do not allow the customer to use units which do not have hose breakaways installed on them.
5
Do not allow the customer to use units with hoses and/or nozzles removed from either side.
6
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
on page 3.

Maintaining Units

"Important
Page 31