Essential Caution Items - Yamaha YP-X Series Owner's Manual

CHAPTER 1 Using the Robot Safely
2
IFig. 1-1 Warning label 1

Essential Caution Items

Particularly important cautions for handling or operating the robot are described
below. In addition, safety information about installation, operation, inspection
and maintenance is provided in each chapter. Be sure to comply with these in-
structions to ensure safe use of the robot.
(1) Observe the following cautions during automatic operation.
Warning labels 1 (Fig. 1-1) are affixed to the robot.
• Install a safeguard (protective enclosure) to keep any person from entering
within the movement range of the robot and suffering injury due to being
struck by moving parts.
• Install a safety interlock that triggers emergency stop when the door or
panel is opened.
• Install safeguards so that no one can enter inside except from doors or
panels equipped with safety interlocks.
• The warning labels 1 shown in Fig. 1-1 are supplied with the robot and
should be affixed to a conspicuous spot on doors or panels equipped with
safety interlocks.
! DANGER
Serious injury or death will result from impact with moving robot.
• Keep outside of guard during operation.
• Lock out power before approaching robot.
(2) Use caution to prevent hands or fingers from being pinched or crushed.
Warning labels 2 (Fig. 1-2) are affixed to the robot.
WARNING
Moving parts can pinch or crush.
Keep hands away from robot arms.
DANGER
Serious injury or death
will result from impact
with moving robot.
• Keep outside of guard
during operation.
• Lock out power before
approaching robot.
IFig. 1-2 Warning label 2
1-2
WARNING
Moving parts can
pinch or crush.
Keep hands away
from robot arms.