Setting The Clock - Sharp HT-CN300H Operation Manual

Home cinema command
Hide thumbs Also See for HT-CN300H:
Table of Contents

Advertisement

Setting the clock

HT-CN300H
By setting the unit on time, you can use it both as a clock and as a timer.
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/ (STAND-BY) button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the ENTER
button.
3
Press the or
button to select the 24-hour or 12-hour display and
then press the ENTER button.
"0:00"
The 24-hour display will appear.
"AM 12:00"
The 12-hour display will appear.
"AM 0:00"
The 12-hour display will appear.
Note that this can only be set when the unit is first installed or it has been reset (see
page 41).
22
4
Press the
TER button.
Press the
advance continuously.
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the
ENTER button.
Press the
to change the time in 5-minute intervals.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
When the unit is set to DVD or VIDEO, the time also ap-
pears on the TV screen.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
(0:00 - 23:59)
(AM 12:00 - PM 11:59)
To change the 24-hour or 12-hour display:
(AM 0:00 - PM 11:59)
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on
page 41 for details.]
2
Perform "Setting the clock" from the beginning.
Note:
Setting the clock cancels the demonstration mode automatically.
or
button to adjust the hour and then press the EN-
or
button once to advance the time by 1 hour. Hold it down to
or
button to adjust the minutes and then press the
or
button once to advance the time by 1 minute. Hold it down
02/6/17
HT-CN300H_(E)4.fm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-cn300hfCp-cn300hcCp-cn300hr

Table of Contents