Sharp HT-CN300H Operation Manual page 36

Speaker settings (continued)
HT-CN300H
Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select speaker delay to make it seem as though the speaker distances are the
same.
1
Press the SET UP button.
2
Within 10 seconds, press the
and press the ENTER button.
3
Within 30 seconds, press the
speaker.
4
Within 30 seconds, press the
and press the ENTER button.
You can change the distance in 0.1 m increments.
To set the distance of other speakers, repeat the operation from step 3.
You can complete the setting operation by pressing the SET UP button twice.
36
or button to select "SP DELAY",
or button to select the desired
or button to select the distance
TV screen
Speaker type
FL Front speaker (Left)
CT Centre speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer
Initial setting of the distance of all the speakers is 2.0 m.
Measure the distance between each speaker and the listening position, and set
the speaker delay.
CT
FL
SW 3 m 3 m
3 m
4 m
SL
In the above illustration, the front speakers, centre speaker, and subwoofer are posi-
tioned at 3 m, and the surround speakers are at 4 m from the listening position.
This unit calculates the delay time automatically according to the distance you set,
and provide the same effect as if they are placed at the same distance from the lis-
tening position.
02/6/17 HT-CN300H_(E)4.fm
Adjustable range
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
FR
3 m
4 m
SR