Delete Speed-Dial Entries; Change Fax Resolution And Lighter/Darker Settings; Change The Fax Resolution - HP 1240 Series User Manual

chapter 3
3
Press " or ! to scroll through the speed-dial entries, and then press
select the appropriate entry.
4 When the current fax number appears, press " to erase it.
5
Reenter the fax number.
Tip:
6
Press
7 If you need to change the name, press " to erase it, and then reenter the
name using the keypad.
8 Press OK.
9 Press

delete speed-dial entries

Follow these steps to delete an individual or group speed-dial entry.
1 Press Setup.
2 Press 2, then press 3.
This selects Speed Dial Setup and then selects Delete Speed Dial.
3 Press ! until the speed-dial entry that you want to delete appears, and
then press OK. You can also enter the speed-dial code by using the front
panel.
Note:
speed-dial entries that make up the group.

change fax resolution and lighter/darker settings

You can change the fax resolution and lighter/darker settings of documents that
you are sending.
Note:
contrast are set independently from fax resolution and fax contrast.
This section contains the following topics:
•

change the fax resolution

• change lighter/darker setting
• set new defaults
change the fax resolution
The Fax Resolution setting affects the transmission speed and quality of faxed
black-and-white documents. The HP Fax only sends faxes at the highest
resolution supported by the receiving fax machine. You can only change the fax
38
To enter a pause in the fax number, press Redial/Pause.
OK
to save the new number.
1 (Yes) to update another entry or
Deleting a group speed-dial entry will not delete the individual
These settings do not affect copy settings. Copy resolution and copy
on page 38
on page 40
2 (No) to exit.
on page 39
OK
to
hp fax 1240 series