To Turn The Projector On - HP xp8010 series Reference Manual

Installation and Setup

To turn the projector on

1. Be sure the power cord is connected, and the main disconnect switch is turned on.
2. Remove the lens cap by pressing in on the tabs
and pulling it straight out
3. Press the power button
remote control.
The power button blinks while the projector warms up. When the lamp turns on,
the power button stays on, and the projector searches for a signal.
4. Connect and power on the source, such as computer, handheld organizer, or DVD
player. See "Making Initial Connections" on page 27 and "Connecting and
Preparing" on page 43 for more information.
24
2
.
3
on top of the projector, or press the power button on the
1
on either side of the lens cap
Reference Guide