setup (continued)
Network >
DHCP
IP address
Subnet mask
Gateway
Reset lamp hours
Machine reset
Help menu
help
About this projector
Diagnostics
Reference Guide
Sets up the TCP/IP network parameters. Check with
the network administrator.
Sets whether a DHCP server is used to assign an IP
address to the projector. Do not use DHCP if you
want the projector to have a fixed IP address every
time power is connected.
Sets the projector IP address if not using DHCP.
Sets the projector subnet mask if not using DHCP.
Sets the projector gateway address if not using
DHCP.
For a new lamp, resets hours of use.
Resets most of the menu settings to default.
Displays information and status for the projector.
Show tests for checking the operation of the
projector and the remote control.
Maintenance
67