Configuring The Projector; To Change Settings Using The On-Screen Menu - HP xp8010 series Reference Manual

Installation and Setup

Configuring the Projector

To change settings using the on-screen menu

You can change the on-screen menu settings with either the buttons on the projector or
the remote control buttons.
1. Press enter on the projector or the remote control to open the on-screen menu.
2. Press
the highlighted option.
3. Press
select the highlighted option.
4. Press
For certain parameters, you see a different display while making the change.
5. Press enter to return to the menu.
6. To go to a different menu, press the back button, and select the menu.
7. To close the on-screen menu, press the back button one or more times as needed.
If nothing occurs for a period of time, the on-screen menu closes. To change the
amount of time until the on-screen menu closes, open the on-screen menu and
select setup > Timeout.
See "Using the On-Screen Menu" on page 61 for a list of all on-screen menu
selections.
34
up or down to highlight the desired menu, and press enter to select
up or down to highlight the desired parameter, and press enter to
left or right or press up or down to select the desired setting.
Reference Guide