Using Smart Test - HP OMNIBER 718 37718A User Manual

Description
HOW TO USE
SMARTSETUP:
Setting the Interfaces

Using Smart Test

Using Smart Test
The Smart Test function can help speed-up configuring the instrument in
two ways.
1 A Smartsetup feature that will attempt to configure the instrument
to receive the incoming signal.
2 A series of "links" that provide quick access to some of the most
frequently used features of the instrument. Note that these tests are
run with the instrument in its current configuration, no attempt is
made to set the instrument to the requirements of the test.
Smartsetup can help the user by attempting to identify the incoming
signal structure and detect mixed payload signal structures.
1 Connect the HP 37718A to the network and choose if necessary the
required SONET
will select DSn or SONET/SDH, but can not select between SONET
and SDH).
2 Press
SMART TEST
The display will show the Smart Test menu above.
3 Press either
SET
interface on the HP 37718A (Smartsetup
RECEIVE
.
or
SELECT
.
13