Adding Errors & Alarms At The Sonet Interface - HP OMNIBER 718 37718A User Manual

Description
HOW TO:
Selecting Test Features
Adding Errors & Alarms at the SONET Interface
Adding Errors & Alarms at the SONET
Interface
Errors and alarms can be added to the SONET interface signal during
testing.
1 Set up the SONET transmit interface and payload required. See
"Setting SONET Transmit Interface " page 4.
2 Choose the ERROR ADD TYPE and RATE required.
Errors can be added at preset rates and at USER programmable rate.
With the exception of ENTIRE FRAME and A1A2 FRAME, errors can
be added at ERROR ALL rate.
If CV-L errors are chosen errors can be added to trigger an APS
THRESHOLD. This takes the form of N errors in T time period. N and
T are both selectable.
3 Choose the ALARM TYPE
Errors and Alarms can be added at the same time.
49