Setting Wander Receive Interface - HP OMNIBER 718 37718A User Manual

Description:
HOW TO:
Setting the Interfaces

Setting Wander Receive Interface

Setting Wander Receive Interface
You can measure Wander at all DSn and SONET rates. An external
timing reference should be selected on the
SONET MAIN SETTINGS
1 Choose an external timing reference on the
MAIN SETTINGS
page 4.
2 If you intend to measure wander on a DSn signal, set up the DSn
receive interface. See, "Setting DSn Receive Interface" page 15.
3 If you intend to measure wander on a SONET signal, set up the
SONET receive interface. See, "Setting SONET Receive Interface"
page 17.
4 Choose MEASUREMENT TYPE
5 Choose the wander HIT THRESHOLD - if the received wander
exceeds the value chosen a wander hit is recorded.
20
display to ensure accurate Wander results.
display. See, "Setting SONET Transmit Interface"
WANDER
PDH/DSn
TRANSMIT
SONET
TRANSMIT
.
or