Setting An Interval Schedule - Toro ECx User Manual

Setting An Interval Schedule

1 Turn the control dial to the
position.
2 Check the
PROGRAMS
reposition the switch to select the desired program.
3 The current watering schedule will be displayed:
CAL for Calendar, Int for Interval or OFF.
• If CAL or OFF is displayed, press the +/
button to select Int, then continue at step
• If Int is displayed, continue at step
4 Press the
NEXT
(1–7) will begin flashing. The day of the week on
which the Interval will start will be shown.
5 To change the Interval number, press the +/
–/ button until the desired number is flashing.
OFF
6 Press the
NEXT
begin flashing.
7 To change the Interval start day, press the +/
button or the –/
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step
18
SET WATERING DAYS
switch setting. If necessary,
4 .
button. The current Interval number
button. The Interval start day will
button until the desired day is
OFF
RAIN
DELAY
or –/
ON OFF
OFF
4
.
SEASON
ADJUST
9 When you have completed setting the Interval
schedule for each program (as needed) return the
or
ON
control dial to the
ON
2 .
3 2
PGM A
3
9
MO
6 7
4 5
AUTO / ON
SET TIME / DAY
1
SET
WATERING
DAYS
SET
PROGRAM
START
SET ZONE TIMES
PROGRAMS
RUN TIMES
/ position.
AUTO ON
3 5 7
ON
4 6
MANUAL
NEXT
START
OFF
2
3 5 7