Table of Contents
Advertisement
Setting Program Start Times
1
Turn the control dial to the
position.
TIMES
2
Check the
PROGRAMS
reposition the switch to select the desired program.
3
Program start time number 1 will begin flashing. The
current program start time or OFF will be displayed
for start time number 1. To select a different program
start time number, press the +/
until the desired number is flashing.
4
Press the
NEXT
begin flashing.
Note: To remove the start time, select OFF by
pressing the +/
time, and continue at step
5
To set the hour (and
–/
button until the desired hour is flashing.
OFF
6
Press the
NEXT
flashing.
To set the minutes, press the +/
7
until the desired minute is flashing.
8
Press the
NEXT
number will begin flashing.
20
SET PROGRAM START
switch setting. If necessary,
or the –/
ON
button. The hour digit(s) or OFF will
and –/
buttons at the same
ON
OFF
8
.
/
), press the +/
AM
PM
button. The minute digits will begin
or –/
ON
OFF
button. The next program start time
RAIN
DELAY
OFF
button
OFF
SEASON
ADJUST
9
To select another start time number, press the +/
or the –/
ber is flashing.
10. To set, change or remove a program start time for
the start time number selected, repeat all of the
or the
ON
steps starting at step
11. To set program start times for another program,
repeat all of the steps starting at step
Return the control dial to the
12
button
3
9
2
1 2
PGM A
AM
12
4 5
6 7
AUTO / ON
SET TIME / DAY
SET
WATERING
DAYS
1
SET
PROGRAM
START
2
SET ZONE
TIMES
PROGRAMS
RUN TIMES
button until the desired start time num-
OFF
4
.
AUTO
3 5 7
9
ON
4 6 8
MANUAL
NEXT
START
OFF
3
5
7
9
ON
2
.
/
position.
ON
Hide quick links:
Advertisement
Table of Contents
