Setting Zone Run Times - Toro ECx User Manual

Setting Zone Run Times

1 Turn the control dial to the
position.
2 Check the
PROGRAMS
reposition the switch to select the desired program.
3 Zone number 1 will be flashing and its current run
time or OFF will be shown. To select a different zone
number, press the +/
ON
desired zone number is flashing.
4 Press the button. The run time (or OFF) will
NEXT
begin flashing.
5 To set the run time, press the +/
ton until the desired run time is shown.
Note: To remove the run time, select OFF by press-
ing the +/ and –/
ON OFF
6 Press the button. The next zone number will
NEXT
begin flashing.
7. Repeat steps 5 and
or remove the run time for the remaining zones .
8. To set the zone run time for another program, repeat
all of the steps starting at step
9 Return the control dial to the
SET ZONE RUN TIMES
switch setting. If necessary,
or the –/ button until the
OFF
or the –/
ON OFF
buttons at the same time.
6 as needed to set, change,
2 .
/ position.
AUTO ON
9
RAIN
DELAY
OFF
SEASON
ADJUST
SET ZONE
RUN TIMES
but-
2 4
5
PGM A
1 2 3 4 5 6
3
AUTO / ON
SET TIME / DAY
MANUAL
SET
START
WATERING
DAYS
SET
PROGRAM
START
1 2
TIMES
PROGRAMS
3 5
ON
4 6
NEXT
OFF
3 5
21