Table of Contents
Advertisement
Keystroke
Home/End
Backspace
Connecting Local Virtual Media
You can connect virtual media directly to the switch using a USB port on the
switch.
NOTE: All USB ports are assigned to a single virtual media session and cannot be
independently mapped.
To start a local virtual media session, complete the following steps:
1
Press <Print Screen> to start the OSCAR interface and open the Main
window.
2
Connect the user to the device with which you want to establish a virtual
media session.
3
Use the arrow keys to highlight the device name, and then press <Enter>.
4
Press <Print Screen> to start the OSCAR interface again. The Virtual
Media window is displayed.
5
Select one or more of the following checkboxes:
•
Locked - Select this checkbox to specify that when the user is
disconnected from a device, the virtual media is also disconnected.
•
Reserve - Select this checkbox to specify that the virtual media
connection can be accessed only by your user name and that no other
user can connect to that device. If both Locked and Reserved are
selected, the session will be reserved.
•
CD ROM - Select this checkbox to establish a virtual media CD
connection to a device. Clear this checkbox to end the connection.
Function
Moves the cursor to the top or bottom of a list.
Erases characters in a text box.
Local OSCAR User Interface
xxx
|
xxx
45
Advertisement
Table of Contents
