Table of Contents
Advertisement
displaying the name or the EID number of each SIP, so even if you move the
SIP/device to another port, the name and configuration will be recognized by the
switch.
NOTE: When it is initially connected, a device will not appear in the Names list until it
is turned on. Once an initial connection has been made, it will appear in the Names
list even when turned off.
To access the OSCAR interface Names dialog box, activate the OSCAR
interface and click Setup > Names.
NOTE: If new SIPs are discovered by the switch, the on-screen list will be
automatically updated. The mouse cursor will change into an hourglass during the
update. No mouse or keyboard input will be accepted until the list update is complete.
To assign names to devices:
1
In the Names dialog box, select a device name or port number and click
Modify to open the Name Modify dialog box.
2
Type a name in the New Name box. Names of devices may contain all
printable characters.
3
Click OK to assign the new name.
4
Repeat steps 1-3 for each device in the system.
5
Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.
Configuring Network Settings
Use the Network dialog box to set the Network Speed, Transmission Mode, and
Network Configuration feature.
To change network settings:
1
If the OSCAR interface is not open, press <Print Screen> to open the
Main dialog box.
2
Click Setup > Network to open the Network dialog box.
Local OSCAR User Interface
xxx
|
xxx
51
Advertisement
Table of Contents
