Dell Server Console Switch User Manual page 85

4 Select one of the following options from the Virtual Media Access Mode
from the drop-down menu: Read-Only or Read-Write.
5 Select one of the Encryption Levels that you wish to be supported.
6 Click Save.
7 Select the checkbox next to each SIP for which you want to enable virtual
media and click Enable VM.
-or-
Select the checkbox next to each SIP for which you want to disable
virtual media and click Disable VM.
Virtual Media Options
You can determine the behavior of the switch during a virtual media session
using the options provided in the Virtual Media Session Settings screen. The
following table outlines the options that can be set for virtual media sessions.
Local Users
Local users can determine the behavior of virtual media from the Local Session
screen. In addition to connecting and disconnecting a virtual media session, you
can configure the settings that are listed in the following table.
Table 4.5: Local Virtual Media Session Settings
Setting Description
Allows virtual media sessions to the first detected CD-ROM or DVD-ROM
CD ROM/
(read-only) drives. Enable this checkbox to establish a virtual media CD-
ROM or DVD-ROM connection to a device. Disable to end a virtual media
DVD ROM
CD-ROM or DVD-ROM connection to a device.
Allows virtual media sessions to the first detected mass storage drive.
Enable this checkbox to establish a virtual media mass storage
Mass Storage
connection to a device. Disable to end a virtual media mass storage
connection to a device.
xxx
OBWI Operation
| xxx
77