Figure 5-3 Connecting The Dlc Using Twisted 2-Pair Cable; Table 5-4 Dt300 Series Loop Resistance And Cable Length; Table 5-5 Dt700 Series Loop Resistance And Cable Length; Table 5-6 Dterm Series I Or Dterm Ip Terminal Loop Resistance And Cable Length - NEC UNIVERGE SV8100 Configuration Manual

Issue 2.00

Figure 5-3 Connecting the DLC Using Twisted 2-Pair Cable

chassis connected with each of the multiline terminals and single line telephones by a
separate twisted 1-pair cable or 2-pair cable (only for multiline terminals).
Refer to the following tables for cabling requirements and specifications:
5 - 8
DLC
Figure 5-3 Connecting the DLC Using Twisted 2-Pair Cable

Table 5-4 DT300 Series Loop Resistance and Cable Length

Table 5-5 DT700 Series Loop Resistance and Cable Length

Table 5-6 Dterm Series i or Dterm IP Terminal Loop Resistance and Cable
Length
Table 5-7 Cable Connection Between the Analog Port and the Single Line
Equipment

Table 5-8 Cabling Requirements

Table 5-4 DT300 Series Loop Resistance and Cable Length
Terminal or Adapter
DTL-2E-1 (BK) TEL
DTL-6DE-1 (BK) TEL
DTL-8LD-1 (BK) TEL
DTL-8LD-1 (WH) TEL
DTL-12BT-1 (BK) TEL
DTL-12PA-1 (BK) TEL
DTL-12D-1 (BK) TEL
DTL-12D-1 (WH) TEL
DTL-24D-1(BK) TEL
DTL-24D-1(WH) TEL
Twisted 2-Pair Cable
By Twisted 1-Pair By Twisted 1-Pair
Cable (without Cable (with AC
AC Adapter)
24 AWG
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
1,969 ft (600m) 6,562 ft (2000m)
UNIVERGE SV8100
is a diagram of the
RJ-11
Multiline Terminal
Adapter)
24 AWG
Hardware Specifications