HP ProCurve NAC 800 User Manual page 113

1. In the 802.1X devices area, click edit next to the device you want to test.
The 802.1X device window appears. The Test connection to this device area
is near the bottom of the window:
Figure 3-28. Add 802.1X Device, Test Connection Area Option 1
Figure 3-29. Add 802.1X Device, Test Connection Area Option 2
2. For ProCurve, Nortel, Other switches (figure 3-28),:
a. Select the Method to execute the re-authentication command in test:
– 802.1X
MAC auth
–
b. Enter the port of the endpoint being tested in the Port text field.
Enter the MAC address of the endpoint being tested in the MAC
c.
address text field.
For Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches (figure 3-
3.
29) if you want to include the re-authentication command as part of the
test, select the Re-authenticate an endpoint during test check box and:
a. Enter the port of the endpoint being tested in the Port text field.
b. Enter the MAC address of the endpoint being tested in the MAC
address text field.
System Configuration
Quarantining, 802.1X
3-65