HP ProCurve NAC 800 User Manual page 438

System Administration
System Settings
TIP:
TIP:
NOTE:
15-10
You must reset the system before you can change the personality of the server;
that is, before you can change an MS to and ES or an ES to a MS.
To reset your system to the as-shipped state:
Command line window
1. Log in as root to the NAC 800 MS or ES, either using SSH or directly with
a keyboard.
2. Enter the following command at the command line:
resetSystem.py [both | ms | es]
Where:
No arguments – The system is reset to the same type (either a single-server
installation with the MS and ES on the same server, an MS, or an ES), the
database is cleared, and the property files are restored to their defaults
both – The system is reset to be a single-server installation (MS and ES
on one server), the database is cleared, and the property files are restored
to their defaults
ms – The system is reset to be an MS, the database is cleared, and the
property files are restored to their defaults
es – The system is reset to be an ES, the database is cleared, and the
property files are restored to their defaults.
See the installation guide for instructions on resetting the system using the
LCD panel.
The resetSystem.py file is in the following directory:
cd /usr/local/nac/bin