Resetting The Nac 800 Server Password - HP ProCurve NAC 800 User Manual

System Administration
Managing Passwords
NAC 800
password
Novell eDirectory Manually entered after installation on the
Table 15-4. NAC 800 Passwords
15-22
Set during
System
configuration>>Quarantining>>802.1X
Quarantine method radio button window.

Resetting the NAC 800 Server Password

If you can remember the NAC 800 user interface password, but cannot
remember the root login password for the NAC 800 MS or ES, log in to the
NAC 800 user interface and navigate to one of the following windows:
To reset the MS Password:
Home>>System configuration>>Management server
In the Other settings area, enter the new password.
1.
Click ok.
2.
To reset the ES Password:
Home>>System configuration>>Enforcement clusters & servers>>Click a
server name>>Configuration
In the Other settings area, enter the new password.
1.
Click ok.
2.
If you cannot remember either password, you can either reset the appliance
mode, or boot to the system partition and recover the whole application
partition which resets all of the passwords, losing any configuration settings
in the process. Instructions for booting to the system partition are beyond the
scope of this document.
To reset the appliance mode:
On the appliance's LCD, reset the server mode (personality). See the installa-
tion guide for instructions on setting and changing the personality.
Recovery process
Novell eDirectory password recovery is
beyond the scope of this document.