HP ProCurve NAC 800 User Manual page 414

DHCP Plug-in
DHCP Plug-in and the NAC 800 User Interface
CAUTION:
Figure 13-8. DHCP Plug-in Server Added Example
NOTE:
13-12
• debug – Log everything (most amount of detail)
Setting the log level to debug may adversely affect performance.
8. Click ok. The added DHCP server appears as shown in the following figure:
9. Continue to add DHCP servers until you have added all of them. The
possible DHCP server plug-in status states are shown in the following
figure:
Figure 13-9. DHCP Plug-in Legend
NAC 800 automatically attempts to connect to the DHCP server. The possible
DHCP server status states are shown in figure 13-9.
10. Click ok to save the changes and return to the Home window.