HP ProCurve NAC 800 User Manual page 264

End-user Access
Customizing Error Messages
Test name
checkPersonalFirewalls.String.1
checkPersonalFirewalls.String.2
checkPersonalFirewalls.String.3
checkServicePacks.String.1
checkServicePacks.String.2
checkServicePacks.String.3
checkServicePacks.String.4
checkServicePacks.String.5
checkServicePacks.String.6
checkServicesNotAllowed.String.1
checkServicesNotAllowed.String.2
checkServicesNotAllowed.String.3
checkServicesRequired.String.1
checkServicesRequired.String.2
checkServicesRequired.String.3
checkSoftwareNotAllowed.String.1
checkSoftwareNotAllowed.String.2
Table 5-1. Default Test Names and Descriptions (cont.)
5-56
Description
The required personal firewall software was not found.
Install a personal firewall and keep it up-to-date. Supported
firewall software: %s,
%s is installed but not running.,
%s service is installed and running.,
An unsupported operating system was encountered.,
The OS is not relevant to this test.,
There are no service packs installed. Run Windows Update
to install the most recent service packs.,
There are no service packs installed. Run Windows Update
to install the most recent service packs.,
All required service packs are installed,
The service packs installed are not current. Run Windows
Update to install the most recent service packs. The current
installed service pack is %s. You must be running service
pack %s or later.,
All services found are allowed.,
The following services are not allowed: %s. Stop the service
by selecting Control Panel>>Administrative Tools (located in
the Performance and Maintenance category
folder)>>Services application>>right-click on the service
and select properties. Change the startup type to manual and
click stop. Click OK to save your changes.,
%s, # placeholder for link location for each service.
All required services were found.,
The following required services were not found: %s. Start the
service by selecting Control Panel>>Administrative
Tools>>Services application>>right-click on the service and
select properties. Change the startup type to automatic and
click start. Click OK to save your changes. If the service does
not exist contact your administrator.,
%s, # placeholder for link location for each service.
Could not import the re module required by this test.,
All software found is allowed.,