Husqvarna Rider Pro 18 AWD Operator's Manual page 21

Husqvarna rider operator's manual
Hide thumbs Also See for Rider Pro 18 AWD:
Table of Contents

Advertisement

4. If the engine is cold, the choke control shall be
moved backwards to its end position.
5. Turn the ignition key to the start position.
6. When the engine starts, immediately release
the ignition key so that it returns to the neutral
position.
IMPORTANT INFORMATION
Do not run the starter motor for more than
5 seconds at a time. If the engine does not
start, wait about 15 seconds before trying
again.
7. Move the choke lever gradually forward once
the engine has started.
8. Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed,
"half throttle", for 3–5 minutes before loading it
too heavily.
When mowing, use 3/4 to full throttle.
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated
areas. Engine exhaust fumes
contain poisonous carbon
monoxide
DRIVING
8009-569
8009-494
8009-495
8009-496
19
English –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider pro 18Rider pro 15

Table of Contents