Husqvarna Rider Pro 18 AWD Operator's Manual page 51

4. Fit the two anti-scalp rollers on each side of the
cutting unit's rear section.
WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can
fly off and cause personal injury.
5. Loosen the spring on the drive belt's belt idler.
There are two designs, see the figures.
6. Put your foot on the front edge of the cutting
unit next to the wheel and lift the cutting unit's
front edge to make it easier to loosen the height
adjustment stay.
7. Secure the stay in the holder.
MAINTENANCE
6017-221
6017-222
8009-598
8009-122
6017-223
49
English –