Husqvarna Rider Pro 18 AWD Operator's Manual page 39

7. Pull the pump belt off of the engine's pulley and
move it under the engine belt pulleys.
8. Pull out the pump belt through the opening
under the pivot bearing and past the belt
tensioner's disc.
Assembly
1. Pull the pump belt through the opening under
the pivot bearing and on the outside past
the belt tensioner's disc.
2. Fit the pump belt on the engine's pulley, move it
under the engine belt pulleys.
3. Fit the belt on the hydrostatic transmission's
pulley.
4. Fit the cooling fan.
5. Tighten the cooling fan nut (2).
6. Check that the centre belt is fitted correctly on its
front pulley and fit the centre belt on the engine's
pulley.
7. Fit the hose clip on the middle and the belt guide
for the centre belt.
8. Hook the spring on the belt tensioner (A) on
the screw (B).
MAINTENANCE
8009-640
8009-640
6012-036
8009-364
A
B
6020-005
37
English –