Removing The Cutting Unit - Husqvarna Rider Pro 18 AWD Operator's Manual

7. Fit the anti-scalp rollers in position
8. Fit the front cover.
9. Secure the springs on the adjuster pulley.
There are two designs, see the figures.

Removing the Cutting Unit

WARNING!
Wear protective glasses when
dismantling the cutting unit. The
springs that tension the belt can
fly off and cause personal injury.
1. Follow "The Cutting Unit's Service Position",
points 1-9 to put the cutting unit in the service
position.
2. Remove the bolt (3) and lift off the cutting unit.
44
– English
MAINTENANCE
8009-439
8009-440
8009-598
8009-674