FRONT FORK
NOTE:
When the fork legs are dismantled, also remo-
ve the screws
odometer cable.
7. Dismantle:
• The front fork
DISMANTLING
1. Remove:
• The rubber plug
• The clip
• The plug
• The fork spring
Dismantling steps:
• Hold the fork leg in a vertical position
• Hold the inner tube in a vice with soft
clamps
CAUTION
Do not damage the surface of the inter-
nal tube.
• Apply pressure to the plug
table bar
• Keep the plug
the clip
with a fine screwdriver.
• Remove the plug
.
• Install a tray for the oil under the fork,
place this upside down and drain out the
oil.
7-22
CHAS
(brake line clamp) and
with a sui-
in position and remove
and the fork spring