C. Track Setting
By default the standard ISO codes (shown below) will be used. To change the data format or
characters used for application specific purposes use the Track Setting options.
1.
Module Setting: Fixed as ISO 1&2&3
2.
Check the track boxes to select which tracks will be read during card swipe
3.
Set the Start Code (Prefix) that leads each track
4.
Set the End Code (Suffix) that follows each track
5.
Check to send the ENTER (or Carriage Return [CR]) after the track
6.
Standard ISO settings are as follows
7.
To clear custom settings and return to default touch the [Clear] button
10
RZ-X650 MSR User Guide
SHARP