Com Settings - Sharp RZ-X650 User Manual

F. COM settings
1. Touch [Set Up] button to view or adjust the COM Port settings for the MSR
2. Port: Select the Port for connection to the MSR device
3. Baud rate: Select the baud rate for communicating with the MSR device
NOTE: Default Port is COM5 and Baud rate is 19200. Changing these settings will affect the
connection between the built in MSR and the POS terminal. These setting should not be
changed when using the built in MSR device.
4. State: Shows the connection state of the MSR device
4.1. DisCon: The MSR device is disconnected
4.2. Connect: The MSR device is connected
12
RZ-X650 MSR User Guide
SHARP