Fujitsu ETERNUS DX100 S3 Operation Manual page 18

Chapter 1 Component Name/LED Name
1.1 Controller Enclosures
LED name
FAULT
MAINTENANCE
CACHE
READY
*1: When the READY LED and the FAULT LED are both on at the same time, an error has occurred while the
Unified configuration is starting up.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
LED status Meaning
The ETERNUS DX is in error status.
(amber) (*1)
A part of the ETERNUS DX requires preventive maintenance.
(blinks amber)
Maintenance for the ETERNUS DX is in progress.
(green)
Maintenance or a status check via ETERNUS Web GUI or ETERNUS
CLI is necessary.
(blinks green)
There is data in the cache memory of the ETERNUS DX.
(green)
The ETERNUS DX is available for use.
(green) (*1)
18
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0