Additional Drive Enclosure Installation Procedure - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 5 Expansion Functions
5.2 Installing Additional Drive Enclosures
5.2.3

Additional Drive Enclosure Installation Procedure

This section explains how to install additional drive enclosures in the ETERNUS DX.
When connecting the cable between enclosures, check the direction of the connector (the tab must be
pointed downward) and firmly insert all the way in.
To disconnect the mini SAS HD cables between enclosures, hold the tab and then pull out the connector.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Do
If components are installed in a way other as described in this section, damage
•
and/or device failure or electrical shock may occur.
Do not install the drive enclosure in the rack with cables, such as power cords, con-
•
nected.
Do not knock the other devices installed in the rack when installing drive enclo-
•
sures.
Pull-tab
74
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0