Additional Drive Enclosure Installation Procedure - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
■
About Shock

Additional Drive Enclosure Installation Procedure

This section explains how to install additional drive enclosures in the ETERNUS AF.
When connecting the mini SAS HD cable between enclosures, check the direction of the connector (the tab
must be pointed downward) and firmly insert all the way in.
To disconnect the mini SAS HD cables between enclosures, hold the tab and then pull out the connector.
Do not handle the drive enclosure roughly or subject it to physical shocks when laying
•
it down.
Do not stack the drive enclosures.
•
Do not knock or drop the drive enclosure on hard objects.
•
If components are installed in a way other than as described in this section, damage
•
and/or device failure or electrical shock may occur.
Do not install the drive enclosure in the rack with cables, such as power cords, connec-
•
ted.
Do not knock the other devices installed in the rack when installing drive enclosures.
•
Tab
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
53
P3AG-1842-06ENZ0