2.
Basic Operation
Using the FUNCTION Button
Using the FUNCTION Button
This section explains how to use the FUNCTION button of the ETERNUS AF.
The following settings can be performed by using the FUNCTION button:
Switching the Master CM to the other controller
•
For the two controllers in the ETERNUS AF, the controller through which the ETERNUS AF is set up and oper-
ated is called the "Master CM", while the other controller is called the "Slave CM".
Restoring the factory default settings (network environment settings and firewall settings) of the LAN ports
•
•
Restoring the factory default user settings (user account, role, and RADIUS settings)
When the user information initialization function on the operation panel is disabled with ETERNUS CLI, the
user settings do not revert to the default values even if the FUNCTION button is operated.
The following procedure explains how to use the FUNCTION button.
1
Remove the flange cover of the ETERNUS AF.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
39
P3AG-1842-06ENZ0