5.
Component Expansion/Function Enhancement
Installing Additional Drives
Drive Handling Instructions
■
About Condensation
■
About Static Electricity
When moving a drive from a cold place, such as an unconditioned store house in win-
•
ter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour for
each 15°C of temperature difference) to adapt to the new temperature.
Do not touch the surface of the board of the drives.
•
When handling drives, wear a wrist strap or touch a metal part to discharge the hu-
•
man body's natural static electricity. Failure to discharge static electricity may cause
failure in the ETERNUS AF.
Leave the drive in its package until ready to install it.
•
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
48
P3AG-1842-06ENZ0