Fujitsu ETERNUS AF250 S2 Basic Operation Manual page 77

7. Troubleshooting
Check List
3
Make sure that AC power is being supplied, then turn the ETERNUS AF on.
■
When the FAULT LED Blinks
Check the general status and the system messages in ETERNUS Web GUI. A general status of
that the ETERNUS AF contains a component that requires preventive maintenance.
In the details screen for each component, check the detailed information for each component with the
bol and contact your maintenance engineer.
For details about how to check the general status via ETERNUS CLI, refer to
CLI" (page 42).
■
When the DRIVE FAULT LED Is On
Check the drive status.
While the Protection (Shield) function is being used, the DRIVE FAULT LED is temporarily turned on. For details
on how the Protection (Shield) function works and how to check whether it is running, refer to "Design Guide
(Basic)".
If the problem persists, contact your maintenance engineer.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
77
indicates
"Displaying Status via ETERNUS
P3AG-1842-06ENZ0
sym-