Fujitsu ETERNUS AF250 S2 Basic Operation Manual page 50

5. Component Expansion/Function Enhancement
Installing Additional Drives
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Tab
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Catch
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever is
still left open.
Dummy drive unit
Lock lever
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
50
P3AG-1842-06ENZ0