Fujitsu ETERNUS AF250 S2 Basic Operation Manual page 60

5. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
11
Connect the DI (OUT) port of CM#1 in the controller enclosure to the DI (IN) port of IOM#1 in the drive
enclosure that is to be added with a mini SAS HD cable between enclosures.
The following figure shows how a mini SAS HD cable between enclosures (CE and DE) is connected when a
drive enclosure is added.
The LINK/FAULT LED for the DI (OUT) port of CM#1 and the FAULT LED for the DI (IN) port of IOM#1 blink on
and off.
Drive enclosure
that is to be added
Controller enclosure
12
Click the [Next >>] button.
A screen that indicates the drive enclosure has been added appears.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
Connect here
60
Connect here
Controller 1
P3AG-1842-06ENZ0