Chapter 5
Component Expansion/Function Enhancement
5.1
Installing Additional Drives
5.1.2
Drive Handling Instructions
■
About Condensation
■
About Static Electricity
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Do
When moving a drive from a cold place, such as an unconditioned store house in
•
winter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15°C of temperature difference) to adapt to the new temperature.
Do Not
Do not touch the surface of the board of the drives.
•
Do
•
When handling drives, wear a wrist strap or touch a metal part to discharge the
human body's natural static electricity. Failure to discharge static electricity may
cause failure in the ETERNUS DX.
Leave the drive in its package until ready to install it.
•
68
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0