Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 89

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
(3)
Install the stopper bracket.
Attach the stopper bracket to the front rack pillar.
Stopper bracket
The M5 screw positions for the stopper brackets are determined by the high-density drive enclo-
sure base line.
Insert the M5 screws in the seventh holes above the base line to fasten the stopper brackets.
(M5 screw)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Insert the M4 screws in the second holes on the front and rear rack pillars above the base
line to fasten the rack rails.
High-density drive enclosure
[Left]
4U
2nd hole
(M4 screw)
High-density drive
enclosure base line
Rack rail
(left)
(left)
M5 screw
M5 screw
(Rack pillar: front)
High-density drive enclosure
Front
[Left]
4U
7th hole
High-density drive
enclosure base line
Rack rail
Copyright 2017 FUJITSU LIMITED
Front/Rear
[Right]
2nd hole
(M4 screw)
Rack rail
(Rack pillar: rear)
Stopper bracket
(right)
[Right]
7th hole
(M5 screw)
89
Rack rail
(right)
P3AM-7662-09ENZ0