Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 93

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
The connectors on the cable with the "n" symbol are connected to the DI (OUT) ports on the nearest
•
enclosure.
6
Connect the DI (IN) port of IOM#0 in the drive enclosure that is to be added to the DI (OUT) port of
IOM#0 in the nearest drive enclosure with the mini SAS HD cable between enclosures.
The following figure shows how the mini SAS HD cables between enclosures are connected when drive
enclosure 2 is added.
Drive enclosure 2
(drive enclosure
that is to be added)
Drive enclosure 1
7
Connect the power cord.
(1)
Connect the power cord to the drive enclosure.
Each enclosure has two (or four) power supply units. Make sure that the power cords are con-
nected to all the power supply units.
(i)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Connect here
Connect here
Connect the power cord plugs to the power inlets of the power supply units.
Copyright 2017 FUJITSU LIMITED
93
P3AM-7662-09ENZ0