Displaying Status Via Eternus Cli; Table 3.1 General Status Of Eternus Web Gui; Table 3.2 General Status Of Eternus Cli - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Hybrid
Hide thumbs Also See for ETERNUS DX100 S4:
Table of Contents

Advertisement

Chapter 3
Storage System Monitoring
3.3

Displaying Status via ETERNUS CLI

Status of the ETERNUS DX is monitored periodically, and the result is displayed as a general status icon with
character strings.

Table 3.1 General Status of ETERNUS Web GUI

Status
For details, refer to "Configuration Guide (Web GUI)".
3.3
Displaying Status via ETERNUS CLI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked by send-
ing the status display command via ETERNUS CLI.
CLI> show status
Summary Status [Normal]
CLI> show status
Summary Status [Error]
CLI> show status
Summary Status [Warning]
The general status of the ETERNUS DX indicates whether an error status component or a warning status com-
ponent exists in the storage system.

Table 3.2 General Status of ETERNUS CLI

Status
Empty
Normal
Pinned Data
Unused
Warning
Maintenance
Error
Loop Down
Not Ready
Subsystem Down
Change Assigned CM
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
(green)
(red)
(red)
(orange)
(yellow)
Description
An undefined or uninstalled component exists in the ETERNUS DX.
The ETERNUS DX is in a normal state.
Pinned data exists in the ETERNUS DX.
An undefined component is installed in the ETERNUS DX.
The ETERNUS DX contains a component that requires preventive maintenance.
The ETERNUS DX is under maintenance.
An error has occurred in a component that is installed in the ETERNUS DX.
The ETERNUS DX is in BackEnd Down status.
An abnormality is detected and access from the host cannot be received.
The ETERNUS DX cannot be used.
CM hot expansion recovery is required.
Copyright 2017 FUJITSU LIMITED
Description
The ETERNUS DX is in a normal state.
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
The ETERNUS DX is in error state.
The ETERNUS DX is under maintenance.
The ETERNUS DX is in warning state.
61
P3AM-7662-09ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx200 s4Eternus dx100 s3Eternus dx200 s3

Table of Contents