Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
5.2.4
Additional Drive Enclosure Installation
This section explains how to install additional drive enclosures in the ETERNUS DX Disk storage
system.
Procedure
1
2
2-1
2-2
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
•
If drive enclosures are installed in a way other as described herein,
damage and/or device failure or electrical shock may occur.
•
Do not install drive enclosures with cables, such as power cords, con-
nected.
•
Do not knock the other devices installed in the rack when installing
drive enclosures.
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen,
check that all components of the ETERNUS DX Disk storage system are in nor-
mal status.
In addition, check the DE-IDs (drive enclosure numbers) of the installed enclo-
sures in the [Drive Enclosure] screen.
Display the [Add Drive Enclosure] screen.
In the [Storage] screen of [Component], click "Add Drive Enclosure" in [Action].
The [Add Drive Enclosure] screen appears.
Check the DE-ID (drive enclosure number) for the drive enclosure that is to be added in
"Target Drive Enclosure", and click the [Next] button.
A screen to show how to install the drive enclosure appears.
Copyright 2012 FUJITSU LIMITED
67
P3AM-4842-03ENZ0