Chapter 5 Installing Optional Products
5.3 Installing Host Interfaces
■
For a dual-controller type
Figure 5.4
5.3.2
Installable Host Interfaces
Table 5.4
Table 5.4
Model name
ETEHF12-L
ETEHX12-L,
ETEHY12-L
ETEHL12-L
ETEHS12-L
ETEHC12-L
At time of purchase, the installable host interface model may be different from those described.
To find the web-site to check the latest version of this manual, refer to "Read Me First".
5.3.3
Host Interface Handling Instructions
■
About condensation
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Host interface 1 (CA#1)
Controller 0 (CM#0)
Installation diagram for host interfaces (dual-controller type)
shows the installable host interfaces.
Installable host interfaces
Host interface for DX80 S2/DX90 S2 (FC, 2port)
Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port)
Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)
Host interface for DX80 S2/DX90 S2 (SAS, 2port)
Host interface for DX80 S2/DX90 S2 (FCoE, 2port)
Do
CAUTION
•
When moving a host interface from a cold place, such as an un-
conditioned store house in winter, to a warmer place such as an
air-conditioned room, the severe temperature change may result in
condensation forming.
To avoid this, allow the packed host interface sufficient time in the
warmer place (one hour for each 15°C of temperature difference)
to adapt to the new temperature.
Copyright 2012 FUJITSU LIMITED
Expansion
Product name
81
Host interface 1 (CA#1)
Expansion
Controller 1 (CM#1)
P3AM-4842-03ENZ0