5.
Hardware Configurations
Optional Product Installation Conditions
Host Interfaces
This section explains the installation conditions for host interfaces.
■
Types of Host Interfaces
The following types are available SAN or NAS connections.
●
ETERNUS DX100 S4/DX200 S4
SAN connection
•
-
FC 32Gbit/s
-
FC 16Gbit/s
FC 8Gbit/s
-
iSCSI 10Gbit/s (10GBASE-SR (*1)/10GBASE-CR)
-
-
iSCSI 10Gbit/s (10GBASE-T)
-
iSCSI 1Gbit/s (1000BASE-T)
-
SAS 12Gbit/s
NAS connection
•
Ethernet 10Gbit/s (*1)
-
-
Ethernet 1Gbit/s
*1: The SFP+ modules are not installed. The SFP+ modules are required to connect the FC cables.
●
ETERNUS DX100 S3/DX200 S3
•
SAN connection
FC 16Gbit/s
-
FC 8Gbit/s
-
iSCSI 10Gbit/s (10GBASE-SR)
-
-
iSCSI 10Gbit/s (10GBASE-CR)
-
iSCSI 10Gbit/s (10GBASE-T)
iSCSI 1Gbit/s (1000BASE-T)
-
FCoE 10Gbit/s
-
SAS 6Gbit/s
-
•
NAS Connection
-
Ethernet 10Gbit/s
Ethernet 1Gbit/s
-
The features of each host interface are described below.
●
FC
Fibre Channel (FC) enables high speed data transfer over long distances by using optical fibers and
coaxial cables. FC is used for database servers where enhanced scalability and high performance
are required.
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
179
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0