Optional Product Installation Conditions; Controller Module - Fujitsu ETERNUS DX100 S4 Design Manual

5. Hardware Configurations

Optional Product Installation Conditions

Optional Product Installation Conditions
This section provides the types and number of optional products and explains policies for optional
product estimations.
Installation conditions for the following optional products are described in this section.
• Controller modules
Memory Extension
•
Host interfaces
•
Unified License
•
• Drive enclosures
• I/O modules
Drives
•
To install the following optional products, a specific firmware version may be required for the
ETERNUS DX.
For details, refer to the "Firmware Release Information" section in "Overview" or refer to "Product
List".
ETERNUS DX100 S4/DX200 S4
•
- Host interfaces (FC 32Gbit/s)
• ETERNUS DX100 S3/DX200 S3
- Memory Extension
Host interfaces (FC 16Gbit/s)
-
Host interfaces (FC 8Gbit/s)
-
- Host interfaces (SAS 6Gbit/s)
- Host interfaces (iSCSI 10Gbit/s, 10GBASE-T)
Unified kit
-
Unified License
-
High-density drive enclosures (12Gbit/s)
-
- Active optical cables
- Nearline SAS self-encrypting disks
SSDs (12Gbit/s)
-
Self encrypting SSDs
-
Advanced Format disks
-

Controller Module

This section explains the installation conditions for controller modules.
■
Types of Controller Modules
The following types of controller are available; a controller that has no host interfaces and a con-
troller that has host interfaces.
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
177
Copyright 2023 Fujitsu Limited
P3AM-7642-32ENZ0