Figure 97 Connection Example With A Dedicated Remote Support Port - Fujitsu ETERNUS DX100 S4 Design Manual

4. Connection Configuration
LAN Connection
■
Connection Configurations
For the ETERNUS DX, two IP addresses are required (one IP address for the MNT port and one IP
address for the RMT port).

Figure 97 Connection Example with a Dedicated Remote Support Port

Administration
terminal
LAN switch
IP address C IP address A
Different LANs are used for MNT ports and RMT ports.
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
SNMP
E-mail server
manager
Syslog server
CM#0 CM#1
Controller enclosure
ETERNUS DX
160
Copyright 2023 Fujitsu Limited
NTP server
Authentication
server
LAN for operation management
Router
Remote support
center
P3AM-7642-32ENZ0