Figure 92 An Iscsi Connection For A Remote Copy Between Eternus Dx/Af Storage Systems (When Lines Are Used) - Fujitsu ETERNUS DX100 S4 Design Manual

4. Connection Configuration
Remote Connections
■
iSCSI
Data transfer is performed between multiple ETERNUS DX/AF storage systems by using the host
interface. Direct connections to a WAN are possible.
Host interfaces with two different maximum transfer rates (10Gbit/s and 1Gbit/s) are available.
Figure 92 An iSCSI Connection for a Remote Copy between ETERNUS DX/AF Storage Systems (When
Lines Are Used)
ETERNUS DX/AF
Copy source
The IPsec function is not supported for iSCSI interfaces.
Select a LAN switch with the IPsec function to use the IPsec function to perform a remote copy.
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
WAN (IP line)
iSCSI-RA
Switch
Copyright 2023 Fujitsu Limited
iSCSI-RA
Switch
154
ETERNUS DX/AF
Copy destination
P3AM-7642-32ENZ0