Power Supply Connection; Input Power Supply Lines - Fujitsu ETERNUS DX100 S4 Design Manual

4. Connection Configuration

Power Supply Connection

Usage
REMCS
(remote support)
AIS Connect (re-
mote support) (*4)
Syslog
(event notification
and audit log send-
ing)
RADIUS
ping
KMIP (key manage-
ment)
ETERNUS DX Dis-
covery
¡: Available / △: Available for some functions / ´: Not available
*1 : Only the following functions are available:
Checking the ETERNUS DX status
•
Switching the Master CM
•
*2: Modifiable
*3: May use either the MNT port or RMT port.
*4: Service for AIS Connect was discontinued in December 2022.
For details on the port numbers for the ETERNUS SF Software, refer to the manual of each Storage
Foundation Software ETERNUS SF.
Power Supply Connection
Connect the power cords (AC cables) of the ETERNUS DX to the power sockets, the UPS sockets,
or the power control unit sockets.
For details about the types and the number of power sockets that can be used, refer to "Power
Socket Specifications" in "Site Planning Guide".

Input Power Supply Lines

For details on input power supply lines, refer to "Site Planning Guide".
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
tcp / Port
Protocol
udp number
smtp tcp 25 (*2)
(client)
pop3 tcp 110 (*2)
(client)
http (cli- tcp 80 or
ent) 8080
(*2)
https tcp 443
(client)
Syslog udp 514 (*2)
Radius udp 1812 (*2) to
ICMP — —
SSL tcp 5696
(*2)
Unique udp 9686
protocol
164
Copyright 2023 Fujitsu Limited
Master CM
Direc-
tion
MNT RMT
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
¡ (*3) ¡ (*3)
from ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
´
from
¡
Slave CM
Remarks
MNT RMT
´ ´
Used for
failure
notifica-
tion, etc.
´ ´
Used for
SMTP
authen-
tication
´ ´
Used for
firmware
down-
load, etc.
´ ´
—
´ ´
—
´ ´
—
´ ´
—
´ ´
—
´ ´
—
P3AM-7642-32ENZ0